Plant & Equipment Inspections
Fall Arrest Equipment Inspection (Harnesses, Lanyards & Anchor Points)
Formal inspection of personal fall arrest equipment in accordance with AS/NZS 1891 series and Australian WHS regulations. Complete for each item inspected.
39 checklist items
Download this template
Checklist Items
| Item | Pass / Yes | Fail / No |
|---|---|---|
| ITEM IDENTIFICATION | ||
| Equipment Asset ID / Serial Number | ___________________________ | |
| Equipment Type (Harness / Lanyard / Inertia Reel / Anchor) | ___________________________ | |
| Make & Model | ___________________________ | |
| Manufacture Date (if marked) | ___________________________ | |
| In-Service Date | ___________________________ | |
| Assigned User | ___________________________ | |
| Inspection Date | ___________________________ | |
| Inspector Name | ___________________________ | |
| HARNESS WEBBING | ||
| Webbing – no cuts, tears, abrasions or chemical damage | Pass ☐ | Fail ☐ |
| Webbing – no heat damage, glazing or melted fibres | Pass ☐ | Fail ☐ |
| Webbing – no discolouration indicating UV or chemical exposure | Pass ☐ | Fail ☐ |
| Webbing – no kinking, twisting or permanent deformation | Pass ☐ | Fail ☐ |
| Stitching – all stitches intact, no broken or missing threads | Pass ☐ | Fail ☐ |
| Load indicators (if fitted) – not deployed | Pass ☐ | Fail ☐ |
| HARNESS HARDWARE | ||
| All buckles – no cracks, corrosion or deformation | Pass ☐ | Fail ☐ |
| Buckle adjustment – slides freely and locks positively | Pass ☐ | Fail ☐ |
| D-ring(s) – no cracks, distortion or corrosion | Pass ☐ | Fail ☐ |
| D-ring stitching bar – secure and undamaged | Pass ☐ | Fail ☐ |
| Shoulder, chest, leg and sub-pelvic straps all present | Yes ☐ | No ☐ |
| LANYARDS & CONNECTORS | ||
| Lanyard webbing/rope – no cuts, abrasion, chemical or heat damage | Pass ☐ | Fail ☐ |
| Energy absorber pack – not deployed, no tears | Pass ☐ | Fail ☐ |
| Carabiners/snap hooks – no cracks, corrosion or deformation | Pass ☐ | Fail ☐ |
| Carabiner gate and locking sleeve – opens/closes/locks correctly | Pass ☐ | Fail ☐ |
| Swivel (if fitted) – free rotation, no damage | Pass ☐ | Fail ☐ |
| SELF-RETRACTING LANYARD (if applicable) | ||
| SRL housing – no cracks or damage | Pass ☐ | Fail ☐ |
| Lifeline retracts under light tension | Pass ☐ | Fail ☐ |
| Brake mechanism engages under sharp pull | Pass ☐ | Fail ☐ |
| Swivel attachment – free rotation | Pass ☐ | Fail ☐ |
| ANCHOR POINTS & SYSTEMS | ||
| Anchor point structure/substrate – no visible corrosion or damage | Pass ☐ | Fail ☐ |
| Anchor hardware (eye bolts, D-rings) – no cracks, distortion | Pass ☐ | Fail ☐ |
| Anchor SWL/rated capacity label present and legible | Yes ☐ | No ☐ |
| Engineered anchor certification current | Yes ☐ | No ☐ |
| LABELLING & COMPLIANCE | ||
| AS/NZS 1891 compliance marking present | Yes ☐ | No ☐ |
| Inspection tag present and current | Yes ☐ | No ☐ |
| Item has NOT been subjected to a fall arrest load | Yes ☐ | No ☐ |
| DEFECTS & SIGN-OFF | ||
| Defects identified (describe or "None") | ___________________________ | |
| Disposition: Pass / Quarantine / Destroy | ___________________________ | |
| Inspector Signature | ___________________________ | |
| Supervisor Signature | ___________________________ | |